Favorite places of your favorite city
Home
Add to preferred sources on Google

Aquarium Tank Volume Calculator

Work out how much space your tank encloses. Enter its inside dimensions and read one volume in litres, US liquid gallons or Imperial gallons.

Your tank dimensions

Choose the shape that matches your tank. A rectangular tank uses inside length, width and height; a cylindrical tank uses inside diameter and height.

Measure the inside of the tank, not the outside frame. Glass thickness, substrate and decorations reduce the actual water volume.

Measure the inside of the tank, not the outside frame. Glass thickness, substrate and decorations reduce the actual water volume.

Measure the inside of the tank, not the outside frame. Glass thickness, substrate and decorations reduce the actual water volume.

Choose the unit you measured in. Switching units keeps your number and converts it for display; the calculation uses your original measurement until you edit it.

US liquid and Imperial gallons are different sizes. Choose the one you want for the answer.

Tank volume

Enter your tank dimensions to see the volume.

This is the geometric inside volume, not the actual water volume after substrate, decorations or the gap below the rim.

Measurements and calculation

Volumes are rounded to the nearest 0.01 of the selected unit. A positive volume below that is shown as “less than”, not zero. A cylindrical tank always shows “approximately” because π is an approximation.

Use digits and a decimal point or comma, without a unit or thousands separators. Up to three decimal places.

Geometric inside volume only; not actual water volume, water weight, fill level or a stocking recommendation.

How to calculate tank volume

  1. Choose the shape that matches your tank: rectangular or cylindrical.
  2. Measure the inside of the tank, not the outside frame. For a rectangular tank use inside length, width and height; for a cylindrical tank use inside diameter and height.
  3. Choose the unit you measured in. Switching units keeps your number and converts it for display, while the calculation still uses your original measurement until you edit it.
  4. Read the volume, then open the calculation details if you want the formula and rounding, or copy and print a qualified summary.

A focused tank-volume tool

  • Two shapes and two dimension units give one inside volume, without a water-weight or stocking dashboard.
  • Read an appropriately rounded answer. Tiny positive volumes say “less than” rather than becoming zero, and a cylindrical tank always says “approximately”.
  • Choose litres, US liquid gallons or Imperial gallons, keeping the two gallon sizes separate.
  • Copy or print a summary that includes your dimensions, the formula and the limits of the calculation.

When this calculation helps

  • Estimate the enclosed space of a new or existing tank before choosing equipment or planning a fill.
  • Convert a known dimension set into litres or gallons without mixing up US liquid and Imperial gallons.
  • Check your own arithmetic when you have already measured the inside of the tank.

What the volume does and does not mean

Use the inside dimensions. Glass thickness, substrate, decorations and the gap below the rim all reduce the actual water volume, so the real fill is usually lower than this geometric result.

A rectangular tank's volume is its inside length multiplied by inside width and inside height. In centimetres, dividing the cubic-centimetre result by 1,000 gives litres.

A cylindrical tank's volume is π multiplied by the square of the inside radius and the inside height. This tool uses the rational approximation π = 355/113, so its cylindrical answer is always approximate.

Each dimension is limited and the total volume is limited by software bounds, not by what is a suitable tank. The result is geometry, not a recommendation about livestock, water changes or care.

Worked volume examples

A tank measuring 100 × 40 × 50 cm on the inside encloses 200,000 cubic centimetres, which is 200 litres.

A cylindrical tank with a 60 cm inside diameter and 50 cm inside height encloses about 141.37 litres using π = 355/113.

A tank measuring 40 × 20 × 20 inches on the inside encloses about 262.19 litres, or about 69.26 US liquid gallons.

The same 200-litre tank is about 52.83 US liquid gallons or about 43.99 Imperial gallons. The two gallon sizes are not interchangeable.

What this calculator does not decide

It does not subtract substrate, decorations, equipment or the gap below the rim, so the actual water volume is lower. It also does not compute water weight, fill level or a stocking level.

It does not recommend a tank size, livestock, water-change volume or care routine. Use appropriate aquarium-care guidance for those decisions.

The supported dimension and volume ranges are software limits, not suitable aquarium sizes. Display resolution does not make a measurement more accurate.

Your dimensions stay in this tool

The calculator processes your dimensions in browser memory and does not send or save them through its own features. Copy and Print operate only when you request them.

The surrounding website may still load assets, analytics or consent services. This is not a promise that the whole website makes no network requests or uses no tracking.

Aquarium tank volume questions

Multiply the inside length, width and height. In centimetres, divide the cubic-centimetre result by 1,000 for litres; in inches, divide the cubic-inch result by 231 for US liquid gallons.

Use π multiplied by the square of the inside radius and the inside height. This tool uses π = 355/113, so it shows an approximate answer.

Measure the inside. Glass thickness, substrate, decorations and the gap below the rim mean the actual water volume is lower than the outside dimensions suggest.

No. One US liquid gallon is 3.785411784 litres and one Imperial gallon is 4.54609 litres. Select the unit you want for the answer.

No. It is the geometric inside volume. Substrate, decorations, equipment and the gap below the rim reduce the actual water volume.

The tool uses the rational approximation π = 355/113. Because that is an approximation of π, the cylindrical result is always shown as approximate.

Your number is kept and converted for display, and the original measurement is restored if you switch back. The calculation uses your original measurement until you edit it.

No. This tool calculates geometric inside volume only. It does not compute water weight, fill level, livestock or a care recommendation.

Sources and unit definitions

These references define units. They do not endorse this calculator or provide aquarium care, fill-level or stocking advice.

Aquarium Water Change Calculator

Calculate the water to remove and replace for one aquarium water change using your actual water volume and chosen percentage.

Open tool — Aquarium Water Change Calculator
View all tools in this category